GoDaddy SecuredAuthorize.net Merchant
Cut At Home On PinterestFollow Cut At Home on TwitterFollow Cut At Home on FacebookFollow Cut At Home on Google PlusFollow Cut At Home on InstagramCut At Home YouTube Channel
We Ship World-Wide! Cut At Home Ships World-Wide
Local: 801-553-2256  
Toll Free: 800-716-5778  

Cut@Home Blog - Scrapbooking & Card Making Ideas


SPELLBINDERS Compatibility Chart

WELCOME to Spellbinders Paper Arts Compatibility Page offered by Cut@Home, where you get the largest selection of Spellbinders dies, a 40% Off Monthly Coupon, and the best customer service. Want to see how Nestabilities work in your die cutting machine?

spellbinders paper artsSpellbinders dies are designed around the Wizard Embossing & Die Cutting Machine. However, they do have compatibility with other systems. Please be advised that Spellbinders two-year Warranty on Spellbinders dies may be voided by using the dies in other systems. Spellbinders makes no guarantees about the cutting or embossing quality of any system other than the Wizard Cutting Machine. Please check the warranty on your die-cutting system before using Spellbinders dies with it. Spellbinders is not responsible for any damage incurred by using Spellbinders dies with other systems.  Okay having said that here below are instructions for die-cutting machines out there on the market! CLICK ON LINK IF YOU NEED TO SEE COMPATIBILITY FOR THE GRAND CALIBUR.

OR you may watch this video below on how to use Spellbinders Dies in these different die cut machines. some of the machines are those stated below that have the sandwich recipes to insert in your home die cutting and embossing machine Stacey gives a GREAT DEMO!


cuttlebugCuttleBug  by Provocraft


Capabilities
This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinders Tan Embossing Mat to emboss in Cuttlebug machine. (click here to view embossing mat and other accessories from spellbinders)
Cutting Sandwich – (Stack from bottom up)
1. A plate
2. C plate
3. Spellbinders Die with ridges, or cutting side up
4. Paper or cardstock
5. B plate
6. Run through Cuttlebug machine
Embossing Sandwich- (Stack from bottom up)
* Remove C Plate for embossing sandwich
1. A plate
2. Spellbinders die face up on A plate with die cut still in the die
3. One Spellbinders Tan Embossing Mat on top
4. Use 2 or 3 pieces of cardstock to shim
* Cautionary Note: Using more than 3 pieces of cardstock to shim Cuttlebug Embossing sandwich will result in B Plate breakage. When using Spellbinders Edgeabilities card-making dies, shim with only 2 pieces of cardstock
5. Two acrylic B plates
6. Run through Cuttlebug machine
7. For added detail, turn die over, color with inks/ chalks through the stencil holes

blue shotBig Shot by Ellison Design (Blue)
Capabilities

This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinders White Spacer Plate and Tan Embossing Mat (Click here to purchase the tan embossing mat) (Click here to purchase the white spacer plate)
Cutting Sandwich – (Stack from bottom up)
1. Big Shots thick white mat
2. One Spellbinders White Spacer Plate
3. Spellbinders Die with ridges, or cutting side up
4. Paper or cardstock
5. Two Big Shot acrylic mats
6. Roll through the BigShot machine
Embossing Sandwich- (Stack from bottom up)
* Remove Spellbinders Spacer Plate while leaving the die in place
1. Spellbinders Tan Embossing Mat over the die
2. One Big Shot acrylic mat
3. Roll through Big Shot machine
4. For added detail, turn die over, color with inks/ chalks through the stencil holes

big shot black Big Shot (Black & Pink) by Ellison-Sizzix


Capabilities
This machine is capable of cutting and embossing any Spellbinders Die. You will need Spellbinders two Tan Embossing Mats to cut and emboss. (Click here to purchase the tan embossing mat)
Cutting Sandwich – (Stack from bottom up)
1. Large platform with all tabs closed
2. Spellbinders Die with ridges, or cutting side up
3. Paper or cardstock
4. Two Big Shot acrylic mats
5. Run through Big Shot machine to die cut
Embossing Sandwich- (Stack from bottom up)
* Remove acrylic mats for embossing sandwich
1. Spellbinders die face up with die cuts still in the die
2. TWO Spellbinders Tan Embossing Mats
3. With one piece of 12×6″ cardstock, tri-fold for a shim and place on top
4. ONE Big Shot acrylic plate
5. Run through the Big Shot machine
* NOTE: This Sandwich combination used to cut and emboss Spellbinders dies in the Black & Pink Big Shot may also be used in the Big Kick by Sizzix
big kickBig Kick by Sizzix
Capabilities

This machine is capable of cutting and embossing any Spellbinders Die. You will need two Spellbinders Tan Embossing Mats to cut and emboss in the Big Shot machine. (Click here to purchase the tan embossing mat)
Cutting Sandwich – (Stack from bottom up)
1. Large platform with all tabs closed
2. Spellbinders Die with ridges, or cutting side up
3. Paper or cardstock
4. Two Big Kick acrylic mats.
5. Run through Big Kick machine to die cut shape.
Embossing Sandwich- (Stack from bottom up)
* Remove acrylic mats for embossing sandwich
1. Spellbinders die face up with die cuts still in the die
2. TWO Spellbinders Tan Embossing Mats
3. With one piece of 12×6″ cardstock, tri-fold for a shim and place on top.
4. ONE Big Shot acrylic plate.
5. Run through the Big Shot machine.

zipemateZipe Mate by Accucut Capabilities
This machine is capable of cutting and embossing any Spellbinders Die.
How to cut and emboss Spellbinders die in the ZEM:
1. Place a Spellbinders Die on ZEMs platform with ridges or cutting side up.
2. Layer paper and cut in the same manner as ZipeCuts.
3. To emboss, do not remove die or paper from platform. Place ZEMs Embossing Foam over paper and with the ZEMs Embossing Mat, roll through to emboss.

original sizzixOriginal Sizzix Press

Capabilities
Ellison manufactures the Sizzix System Converter. You will need to use the system converter along with Spellbinders Spacer Plate and Tan Embossing Mat to cut and emboss Spellbinders Dies. (Click here to purchase the tan embossing mat) (Click here to purchase the white spacer plate)
How to cut Spellbinders dies in the Sizzix Machine:
1. Place the Sizzix System Converter into the Sizzix Machine.
2. On the Cutting Pad, place paper to be cut, then Spellbinders Die, ridges down.
3. Place the Spellbinders Spacer Plate over the Spellbinders Die.
4. Create a shim by tri-folding a 12×6″ piece of cardstock. Place on top of Spacer Plate.
5. Push through Sizzix Machine to cut.
How to Emboss Spellbinders dies in the Sizzix Machine:
1. After Cutting Die in Sizzix Machine, remove paper shim and spacer plate.
2. Leave die cut in the die.
3. Turn over Spellbinders Die, placing it on Sizzix cut pad.
4. Place Spellbinders Tan Embossing Mat on top.
5. Place paper shim on top of Tan Embossing Mat.
6. Push through Sizzix Machine to emboss.
* NOTE: It may take several presses to cut larger Spellbinders dies.

quickutz epic six

Epic Six by Quickutz

Capabilities
[Using Spellbinder's Dies with the Epic Six:]

There are two formulas that you can use for this machine to cut an emboss Spellbinder’s Dies. The first example for embossing seems to be more effective for a more distinct line of embossing.

Cutting formula #1:
1. Lt. Gray cutting Platform
2. Quickutz grid sticky mat (These can be purchased separately or they come with QK Cookie Cutter Alphabets)
3. Spellbinders Die cutting side up
4. Paper or card stock
5. Quickutz clear sticky mat (you do not need to remove the green protective coating)
6. Run through the machine. Leave paper or cardstock in the die after if you want to emboss.

Embossing formula #1:
1. Lt. Gray Cutting Platform (comes with machine)
2. Spellbinder’s Die with paper or cardstock still in place, cutting side up
3. Tan Embossing Mat
4. Quickutz Clear Sticky Mat
5. Run through machine.

Cutting Formula #2
1. Lt. Gray Cutting Platform (comes with machine)
2. Spellbinder’s Die cutting side up
3. Paper or card stock
4. Epic Cutting Mat (comes with machine)
5. Run through machine. Leave paper or cardstock in the die after cutting if you want to emboss.

Embossing Formula #2
1. Dk. Gray Platform (comes with machine)
2. Card stock or very thin chipboard shim
3. Die with paper or cardstock still in place, cutting side up
4. Tan Embossing Mat
5. Epic Cutting Mat (comes with machine)
6. Run through machine.

Remember to NEVER force your sandwich formula through your machine! You may break your machine if you force it! If your material is to thick, you may have to make slight adjustments to your formula.

revolution die-cutting systemRevolution by QuicKutz

Capabilities
This machine may be used to cut and emboss Spellbinders dies.
How to cut Spellbinders dies in the Revolution
1. Place die onto Revolution platform with cut edge up
2. Layer paper on die.
3. Place acrylic cutting mat on top.
4. Roll through Revolution machine.
How to emboss Spellbinders dies in the Revolution
1. Remove acrylic cutting mat.
2. Leave die in place with die cut still in die.
3. Place Spellbinders Tan Embossing Mat on top.
4. Layer Acrylic embossing mat.
5. Roll through Revolution machine.

Spellbinders Raspberry Wizard Compatibility

The Wizard comes with all mats and pads needed to cut with:
Steel Rule Dies
Sizzix Originals*
Zipe Slims
Compact Dies by Cross-Cuts
Thick Cuts by Ellison
DesignSizzix Bigs
Low-Profile Dies
Sizzlets
Thin Cuts by Ellison Design
Chemically Etched Dies
Spellbinders Style Dies
QuicKutz
ZipeCuts
ZipeSnaps
SAR(Some Assembly Required)
BossKuts
*As of January 1, 2006, the Sizzix Cuts-n-Folds dies do not consistently work well with the Wizard System.
**Sizzlet dies that are longer than eight inches will not work with the Wizard System.
The Wizard comes with all mats and pads needed to emboss with.
Any brass stencil
Spellbinders Die Templates
Spellbinders Totally Texture Plates
The additional Charm Embossing Kit allows:
Embossing charms & findings
Embossing with Fiskars Texture Plates
Flattening bottle caps
Sandwich Recipes
To use these sandwich recipes, simply layer the items listed in order from bottom to top. Follow Wizard User Manual.
Instructions for layering die cutting sandwiches with the Wizard System
Cutting with Steel Rule Dies
1. Spellbinders Universal White Master Mat (included with the Wizard, replacements available separately)
2. Paper
3. Steel Rule Die, blade down
Cutting with Low-Profile Dies
1. White Master Mat
2. Paper
3. Low Profile Die, foam side down.
4. White Master Mat
Cutting with Chemically Etched Dies
1 White Master Mat
2. White Spacer Plate
3. Chemically Etched Die, blade or foam side up
4. Paper
White Master Mat
Embossing with Spellbinders Dies, Totally Texture Plate, or Brass Stencils
1. White Master Mat
2. Die, stencil or texture plate
3. Paper
4. Tan Emboss Pad
5. White Master Mat
Embossing Charms
1. White Master Mat
2. Charm
3. Paper or Foil
4. One or Two Tan Emboss Pads, depending on charm thickness
5. Blue Emboss Mat
Embossing with Fiskars Texture Plates
1. White Master Mat
2. Fiskars Texture Plate
3. Paper
4. Tan Emboss Pad
5. Blue Emboss Mat
Flattening Bottle Caps
1. White Master Mat
2. Piece of scrap paper
3. Bottle cap, flat side (top) down
4. Tan Emboss Pad
5. Blue Emboss Mat

Spellbinders Item Numbers
White Spacer Plate: W-017
Tan Embossing Mat: W-023
Charm Embossing Kit: W-003

SpellbindersSizzixTim HoltzHeartfelt CreationsGraphic 45Silhouette AmericaElizabeth Craft DesignsMagnolia StampsSpectrum NoirJustRite Stampers